Program P6: Edit-Common Eg - Korg EXB-MOSS Manual

Program P6: Edit-Common EG

This section provides four general purpose EGs
(envelope generators). The four EGs can be used as
modulation sources for the parameters of other
sections to create time-variant change in the sound.
Sustain level
Attack level
+99 Note-on
Start
level
Break
level
0
Decay
Attack
time time
-99
6–1: EG 1
6–1a
6–1b
6–1c
6–1a: Level (EG Level)
Start (Start Level)
Specifies the value at the time of note-on.
Attack (Attack Level)
Specifies the value that will be reached after the
Attack Time has elapsed.
Break (Break Level)
Specifies the value that will be reached after the
Decay Time has elapsed.
Sustain (Sustain Level)
Specifies the value that will be reached after the Slope
Time has elapsed.
Release (Release Level)
Specifies the value that will be reached after the
Release Time has elapsed.
Note-off
Time
Slope
Release
time
time
6–1d
[–99...+99]
[–99...+99]
[–99...+99]
[–99...+99]
[–99...+99]
6–1b: Time (EG Time)
Attack (Attack Time)
Specifies the time from note-on (when a note is
played) until the value reaches the attack level. With a
value of 0, the value will change instantly. With a
value of 99, the value will change slowly.
Decay (Decay Time)
Specifies the time from when the attack time ends
until the Break Level is reached.
Slope (Slope Time)
Specifies the time from when the decay time ends
until the Sustain Level is reached.
Release (Slope Time)
Specifies the time from note-off (when a note is
released) until the Release Level is reached.
6–1c: Level Modulation
AMS (Alternate Modulation Source)
Selects a modulation source ( p.48 of this manual)
that will control the level of EG1.
Intensity (EG Level AMS Intensity)
Specifies the depth and direction of the effect that
"AMS" will have on the EG levels.
Velocity Control
Specifies the depth and direction of the effect that
velocity will have on the EG levels.
EG changes (level) (AMS=Velocity, Intensity=+value)
Note-on Note-on
Note-off
When keyboard is When keyboard is
played softly with St, played strongly with
At, and Br set to "+" St, At and Br set to "+"
(the settings of 6-1a:
Level)
6–1d: Time Modulation
AMS1 (Alternate Modulation Source 1)
Selects a modulation source 1 ( p.48 of this manual)
that will control the EG1 times.
Intensity (EG Time AMS1 Intensity)
Specifies the depth and direction of the effect that
"AMS1" will have on the EG times.
[0...99]
[0...99]
[0...99]
[0...99]
[Off...MIDI:CC#83]
[–99...+99]
[–99...+99]
Note-on
Note-off
Note-off
When keyboard is
played strongly with
St, At and Br set to "-"
[Off...MIDI:CC#83]
[–99...+99]
45