Sequencer And Song Play Modes - Korg EXB-MOSS Manual

Hide thumbs Also See for EXB-MOSS:
Table of Contents

Advertisement

The actual levels of send 1 and 2 for a timbre
using a bank A–E or G program is determined
by multiplying the timbre setting by the send
level of the program, but for timbres that use a
bank F program, the send level setting of the
timbre will be the actual level.
This setting has no effect for bank A–E or G
programs.
(6) Select Combination P1: Edit-Program/
Mixer.
(7) In "Bank/Program," select a bank F
program.
Programs can also be selected from the "Category/Program
Select" menu or the "Bank/Program Select" menu.
(8) Use "Pan" to adjust the panpot of the
timbre.
When a bank F program is selected, the Random
setting will not be available. If Random is selected,
the sound will be placed in the center, as with C064.
(9) Use "Volume" to adjust the volume of
the timbre.
(10) Make settings for other parameters.
In the same way as for programs of other banks, set the
parameters of each timbre, and make arpeggiator settings and
insertion/master effect settings.
However when a bank F program is selected for a timbre, the
following parameters will function as explained below.
— "OSC Select" will have no effect. (Combination P2:
OSC tab)
— The "Detune" range will be ±100. Even if the absolute
value of the parameter setting is greater than 100, the actual
detune value will be ±100 cents. (Program P2: OSC tab)
— The Key Zone / Vel Zone "Top Slope" and
"Bottom Slope" settings will have no effect. (Program
P4: Key Z, Vel Z tabs)
Sequencer and Song Play
modes
Bank F programs can be selected for playback of a
song or Standard MIDI File, or for performance from
the keyboard. In the same way as in a combination,
bank F programs can be selected for two or more
tracks and used multi-timbrally. In this case, the total
polyphony of the bank F programs will be six
voices.
Insertion/master effect settings and individual
audio output routing cannot be specified
independently for each track.
Details of the settings, the operation of each param-
eter, and cautions are the same as for combinations.
Refer to "Editing a combination" on p.8 of this
manual.
Sequencer P4: MOSS T01–08, MOSS T09–16 tabs
Song Play P1: MOSS T01–08, MOSS T09–16 tabs
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents