Program P4: Edit-Amp - Korg EXB-MOSS Manual

Hide thumbs Also See for EXB-MOSS:
Table of Contents

Advertisement

Filter B:
Here you can adjust the settings for Filter B. These
parameters have the same structure as the "Filter A"
parameters.
3-2b: Filter A/B Modulation
Filter A:
AMS1 (Alternate Modulation Source 1)
Selects a modulation source 1 ( p.48 of this manual)
that will control "Frequency."
Intensity (Cutoff Frequency AMS1 Intensity)
Specifies the depth and direction of the effect that
"AMS1" will have on the cutoff frequency.
AMS2 (Alternate Modulation Source 2)
Selects a modulation source 2 ( p.48 of this manual)
that will control "Frequency."
Intensity (Cutoff Frequency AMS2 Intensity)
Specifies the depth and direction of the effect that
"AMS2" will have on the cutoff frequency.
Filter B:
Adjust the "Intensity" of "AMS1" and "AMS2"
specified for "Filter A."
3–3: Filter2
For details on the parameters, refer to "3–1: Filter."
3–4: Filter2 Mod. (Filter 2 Modulation)
For details on the parameters, refer to "3–2: Filter 1
Mod."
40
Here, you can make volume-related settings.
There are two independent amps, and the signals
which are input to each amp are determined by the
setting of "3–1a: Routing" ( p.47 of this manual).
4–1: Amp1 Level (Amplifier 1 Level)
[Off...MIDI:CC#83]
[–99...+99]
[Off...MIDI:CC#83]
4–1a: Amp Level
[–99...+99]
Amp Level
Specifies the volume level of amp 1. The input signal
to amp 1 is determined by the "3–1a:Routing" setting
EG (Amplitude Modulation EG)
Selects the EG that will create time-variant change in
the volume level of amp 1. For the settings of each
EG, refer to "4–3: Amp EG" , "Program P6."
AMS (Alternate Modulation Source)
Selects a modulation source ( p.48 of this manual)
that will control the volume level of amp 1.
Intensity (Amplitude AMS Intensity)
Specifies the depth and direction of the effect of
"AMS" on the volume level.
4–1b: Keyboard Track
Key Low
Specifies the key at which Lower keyboard tracking
will begin.
Key High
Specifies the key at which Higher keyboard tracking
will begin.

Program P4: Edit-Amp

4–1a
4–1b
[0...99]
[EG1...EG4, AmpEG]
[Off...MIDI:CC#83]
[–99...+99]
[C-1...G9]
[C-1...G9]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents