Setting The Date And Time - Korg mr-2 Owner's Manual

Backlight setting
You can turn the backlight off if you're using the MR‐2 in a brightly lit loca‐
tion, or make it automatically turn off a set period of time after the most
recent operation. If this parameter is set to "Off," the backlight will not turn
on. If this parameter is set to "On," the backlight will always remain on.
Auto shutdown setting
If no operations have been performed for the length of time you specify
here, the shutdown screen will appear automatically, and the power will
turn off several seconds after that. This will prevent the battery from run‐
ning down in the event you forget to turn off the power.
If this is set "Off" the power will stay on; Auto shutdown will not occur.
LED setting
Normally, the recording LED will light while recording, but you can reduce
the power consumption even further by turning this LED function off.

Setting the date and time

If you set the MR‐2's date and time, the recorded files will have the correct
date and time stamp. Here's how to set the internal clock.
1. Press the MENU button to display the menu list, then use the control‐
ler buttons to select and confirm "SYSTEM."
The system setting (SYSTEM) screen will appear.
2. Use the controller buttons to select the date and time indication in the
top line.
3. Press the Confirmation button (or press the right (
The selection icon will change from to , and the year indication will
be highlighted.
4. Use the left/right controller buttons (
you want to edit, and use the up/down controller buttons (
change the value.
Pressing the Confirmation button will also move the edited item
toward the right.
Push
,
) controller button).
) to move to the item that
, ) to
31