Selecting The Recording Format - Korg mr-2 Owner's Manual

About automatic input source detection
The MR‐02 automatically scans to determine whether or not the MIC IN
or LINE IN jack is connected. If the unit detects a connected jack, it will
automatically assign the jack as the input source. Therefore, do not con‐
nect anything to jacks other than the one you want to use for audio input.
If multiple jacks are connected to external devices, the unit will select a
jack according to the following input priority list.
If no jacks are connected, the unit will automatically select the built‐in
microphone as the input source.
Connected devices
Line device, external microphone LINE IN jack
Line input
External microphone
None
Before you use a Plug‐In‐Power microphone, you must set the cor‐
responding parameters (see page 22).

Selecting the recording format

Here's how to select the recording format. Each time you record, a new
project will be created in the recording format you've selected.
The default setting is WAV 16‐bit 44.1 kHz.
1. Press the MENU button to display the menu list, then use the control‐
ler buttons to select and confirm "REC FORMAT."
The recording format (REC FORMAT) setting screen will appear.
Selection icon
2. Use the controller buttons to select and confirm one of the "New Project
Type" options.
A check mark will appear in the check box for the project type you selected
and confirmed.
You can choose from WAV (BWF), MP2, MP3, DSDIFF, DSF, and WSD.
For details on each type, refer to "Project recording format (New Proj‐
ect Type)" on page 17.
14
Push
Input source automatically selected
LINE IN jack
MIC IN jack
Built‐in microphone
Push
Push