Using Multiple 1212 I/O Cards; Setting The Word Clock Source In Digital Audio Software - Korg SoundLink DRS 1212 I/O Owner's Manual

Pci multi-channel audio interface
Table of Contents

Advertisement

System Configurations
1.
2.
3.
This page shows a list of all the installed I/O cards, and allows you to
select a pair of channels from any card as the master clock source. You can
also select the dedicated word clock input, or the internal clock.
4.
5.

Using multiple 1212 I/O cards

Multiple 1212 I/O cards may be used simultaneously. 1212 I/O-compatible
digital audio software may or may not support the use of multiple
1212 I/O cards; consult your software's manual for details.
When using multiple 1212 I/O cards, the only additional concern is that
one of the cards needs to be the word clock master for the rest of the cards.
To do this:
1.
You can daisy-chain the word clock cables from card to card, as necessary.
2.
The master card's word clock source can be set as desired.

Setting the word clock source in digital audio software

When using the 1212 I/O with digital audio software which directly
supports the 1212 I/O, the clock source, sample rate, and other parameters
are controlled directly by the digital audio software (and not by the
1212 I/O Utility).
In Deck II, the word clock source is set by the Sync Mode parameter, in the
Options menu's Hardware Configuration dialog. Deck's "Digital" setting is
equivalent to the 1212 I/O's "S/PDIF•Word Clock."
In Cubase VST, the word clock source is set by the Audio Clock Source
parameter, in the Audio menu's Audio Setup dialog.
For other digital audio software, please refer to the program's manual for
more information.
16
Connect the 1212 I/O's optical input and output to an ADAT I/O card
on the 02R.
On the 02R, Press the Digital I/O button.
Go to the Word Clock Select page.
Set the 02R to use the ADAT 1/2 channels from the card connected to
the 1212 I/O.
In the digital audio program, set the 1212 I/O's word clock source to
Internal.
Connect the word clock output of the master 1212 I/O card to the
word clock input of the slave 1212 I/O card.
When using the 1212 I/O as a Windows wave device, use the
1212 I/O Utility to set the word clock source of all slave cards to
S/PDIF•Word Clock.
Korg 1212 I/O

Advertisement

Table of Contents
loading

Table of Contents