Direct Access Tuning; Frequency Step Setting - Kenwood DPX-U5130BT Instruction Manual

Listen to the tuner

Direct access tuning

(Function of remote control)
You can search for a station directly by entering
frequency.
1
Press the [DIRECT] button on the remote
control.
"– – – –" appears and enter the Direct access tuning
mode.
2
Press the number buttons on the remote
control to enter the frequency.
Example:
Desired frequency Press the following buttons
92.1 MHz (FM) [9], [2], [1]
810 kHz (AM) [8], [1], [0]
3
Press the [ENT] button on the remote control.
Canceling Direct access tuning mode
Press the [6] button on the remote control.

Frequency Step Setting

Changing the tuning frequency step.
The original setting is FM band 50 kHz, and AM
band 9 kHz.
1
Press and hold the [SRC] button to turn the
power OFF.
2
While pressing the [1] and [5] buttons, press
the [SRC] button to switch the frequency step.
Release your fingers from the button after the
display appears.
The frequency step changes to FM band 200 kHz,
and AM band 10 kHz.
Notes
• When the same operation is repeated, the frequency step
returns to the original setting.
• When the frequency step is changed, the frequencies in the
memory are deleted.
24
|
DPX-U5130BT/ DPX-U5130