Kenwood DPX-U5130BT Instruction Manual page 45

R L
Rear output (DPX-U5130BT only)
Front output
Sub Woofer output (DPX-U5130BT only)
Rear output/ Sub Woofer output (DPX-U5130 only)
Fuse (10A)
Wiring harness
(Accessory 1)
If no connections are made, do not let the wire come out from the tab.
Blue/White
(Power control wire)
Blue (Antenna control wire)
Brown (Mute control wire)
Orange/ White
(Dimmer control wire)
Light Blue/ Yellow
(Steering remote control wire)
When using the optional power amplifier, connect
to its power control terminal.
P.CONT
Depending on what antenna you are using,
connect either to the control terminal of the motor
ANT.
antenna, or to the power terminal for the booster
CONT
amplifier of the film-type or short pole type
antenna. (Max 300mA, 12V DC)
Connect to the terminal that is grounded when
MUTE
either the telephone rings or during conversation.
To connect the Kenwood navigation system,
⁄
consult your navigation manual.
To car light control switch
ILLUMI
To use the steering wheel remote control feature,
an exclusive remote adapter (not supplied) that
REMOTE CONT
matches your car is required.
STEERING WHEEL
REMOTE INPUT
45
|
English