Deleting A Registered Bluetooth Device; Bluetooth Device Registration Test - Kenwood DPX-U5130BT Instruction Manual

When no device can be selected
• If a cell-phone is already selected, deselect it, and then
select a different one.
• If you cannot select a device using the audio player,
connect the device with the audio player.
Deleting a registered Bluetooth
device
You can delete a registered Bluetooth device.
1
Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
2
Use the [Control knob] to select "SETTINGS" >
"PAIRING" > "DEVICE DELETE".
For how to use the [Control knob], refer to <How to
select the item> (page 9).
"(name)" appears.
3
Use the [Control knob] to select an Bluetooth
device.
4
Use the [Control knob] to select "YES".
"COMPLETED" appears.
Exit the Bluetooth mode.
Press the [Ú] button.
When a registered device is deleted
• When a registered cell-phone is deleted, its phone Book,
and log are also deleted.

Bluetooth device registration test

You can check whether a Bluetooth device can be
registered by operating this unit.
1
Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
2
Use the [Control knob] to select "BT TEST
MODE".
For how to use the [Control knob], refer to <How to
select the item> (page 9).
"PLEASE PAIR YOUR PHONE" appears.
3
By operating the Bluetooth device, register
the hands-free unit or audio unit (pairing).
Select "DPX-U51**BT" (for DPX-U5130BT) from the
list of found units.
4
If "(Bluetooth device name)" appears, proceed
to step 6.
5
Input the PIN code ("0000") in the Bluetooth
device.
6
Use the [Control knob] to select an Bluetooth
device.
When pairing is completed successfully, a
connection test starts automatically.
When the connection test is completed, test results
are displayed on a function basis ("OK": Enabled;
"NG": Disabled).
Display
"PAIRING"
"HF CNT"
"AUD CNT"
"PB DL"
7
Press the [Control knob].
Exit the test mode.
Description
Registration in this unit
Hands-free phoning
Audio playback
Phone Book downloading
English
31
|