Calling A Number In The Call Log; Speed Dialing (Preset Dial); Registering In The Preset Dial Number List; During A Call - Kenwood DPX-U5130BT Instruction Manual

Calling a number in the call log

1
Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
2
Use the [Control knob] to select "CALL
HISTORY".
For how to use the [Control knob], refer to <How to
select the item> (page 9).
3
Turn the [Control knob] to select a name and
phone number.
I : Incoming calls
O : Outgoing calls
M : Missed calls
4
Press the [Control knob].
Make a call.

Speed dialing (Preset dial)

1
Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
2
Press number button ([1] to [6]).
3
Press the [Control knob].
Make a call.
Registering a dial number
• You need to register the preset dial number. Refer to
<Registering in the preset dial number list> (page 33).
Registering in the preset dial number
list
1
Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
2
Enter the phone number you wish to register
Enter the phone number with reference to the
following:
<Calling a number in the phone book> (page
32)
<Dialing a number> (page 32)
<Calling a number in the call log> (page 33)
3
Press and hold number button ([1] to [6]).

During a call

Disconnecting a call
Press the [SRC] button.
Switching to the Private mode
Press the [L] button.
Pressing this knob each time switches between the
private talk mode ("PV TALK") and hands-free talk
mode ("HF TALK").
When the previous source is restored in the Private mode
• Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection. If
this happens, the source cannot be switched back to the
hands-free talk mode by operating this unit. Operate your
cell-phone to return to the hands-free talk mode.
Adjusting the voice volume during a call
Turn the [Control knob].
33
English |