Modifying The Note Durations (Change Gate Time); Replacing Performance Data (Global Change) - Roland Workstation GW-8 Supplementary Manual

Creating a New Song
It is not possible to restore the data to its original state after
executing this operation.
Modifying the Note Durations
(Change Gate Time)
This function modifies the durations of the notes in the
specified region.
1. In the "Song Edit Menu," select "8. Change Gate Time"
and press [ENTER].
The SONG EDIT CHANGE GATE TIME screen will
appear.
2. Use [ ] [ ] [ ] [
parameter that you want to change, and use the VALUE
dial to make the desired settings.
Parameter Value
Part ALL, 1–16
0001: 01:
From (MEAS:
BEAT: TICK)
000–
To (MEAS: 0001: 01:
BEAT: TICK)
000–
-4800–
Bias (TICK)
4800 (TICK)
Magnify 0–200%
C–(Note
Note Range
Range Max
Min
value)
(Note Range
Note Range
Min value)–
Max
G9
3. Select "EXECUTE" and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
36
] to move the cursor to the
Explanation
Selects the Song part whose
gate times are to modified.
Specifies the beginning of
the region whose gate times
are to be modified.
Specifies the end of the
region whose gate times
are to be modified.
Specifies the amount by
which the gate times are to
be modified, in units of a
tick.
Specifies the ratio by which
the gate times will be
modified.
Specifies the lowest pitch
whose gate times are to be
modified.
Specifies the highest pitch
whose gate times are to be
modified.
Replacing Performance Data
(Global Change)
This function replaces the specified MSB, LSB, and PC values
with different MSB, LSB, and PC values. You can also apply a
relative adjustment to the control values (Expression, Panpot,
Reverb, Chorus) within the Song.
1. In the "Song Edit Menu," select "9. Global Change" and
press [ENTER].
The SONG EDIT GLOBAL CHANGE screen will appear.
2. Use [ ] [ ] [ ] [
parameter that you want to change, and use the VALUE
dial to make the desired settings.
Parameter Value
Part
ALL, 1–16
OFF,
MSB
(FROM)
0–127, ALL
MSB (TO) OFF, 0–127
OFF,
LSB (FROM)
0–127, ALL
LSB (TO) OFF, 0–127
OFF,
PC (FROM)
1–128, ALL
PC (TO) OFF, 1–128
VOLUME -127–127
EXPRESS -127–127
PANPOT -127–127
REVERB -127–127
CHORUS
-127–127
] to move the cursor to the
Explanation
Selects the Song part whose
data values you want to
modify.
Specifies the MSB value that
will be changed.
By choosing ALL, you can set
more than one Song part to
the same value.
Specifies the new MSB value.
Specifies the LSB value that is
to be changed.
By choosing ALL, you can set
more than one Song part to
the same value.
Specifies the new LSB value.
Specifies the PC value that is
to be changed.
By choosing ALL, you can set
more than one Song part to
the same value.
Specifies the new PC value.
Adjusts the Volume values.
Adjusts the Expression
values.
Adjusts the Panpot values.
Adjusts the Reverb values.
Adjusts the Chorus values.