Creating a New Song
Correcting the Note Timing (Quantize)
This function corrects the timing of performance data in the
specified region.
1. In the "Song Edit Menu," select "1. Quantize" and
[ENTER].
The SONG EDIT QUANTIZE screen will appear.
2. Use [
] [
] [
] [
parameter that you want to change, and use the VALUE
dial to make the desired settings.
Parameter
Value
Part
ALL, 1–16
From
(MEAS:
0001: 01: 000–
BEAT: TICK)
To (MEAS:
0001: 01: 000–
BEAT: TICK)
1/4, 1/8,
1/8T, 1/16,
Resolution
1/16T, 1/32,
1/32T, 1/64
Strength
0–100%
C–(Note Range
Note
Range Min
Max value)
(Note Range
Note
Range Max
Min value)–G9
3. Select "EXECUTE" and then press [ENTER].
32
] to move the cursor to the
Explanation
Selects the Song part to
which the Quantize
operation is to be applied.
Specifies the beginning of
the region to which
Quantize is to be applied.
Specifies the end of the
region to which Quantize
is to be applied.
Specifies the timing
interval for quantization.
Specifies the amount of
timing correction applied
relative to the Resolution
timing interval.
If you select "100%,"
notes will be corrected all
the way to precise
intervals of the specified
Resolution.
With lower values, the
correction will not be as
tight, and with a setting of
0% there will be no
correction at all.
Specifies the lowest pitch
to be quantized.
Specifies the highest pitch
to be quantized.
It is not possible to restore the data to its original state after
executing this operation.
Erasing Unwanted Data (Erase)
This function erases performance data from the specified
region. The erased data will be converted to rests; the
measures themselves will remain.
1. In the "Song Edit Menu," select "2. Erase" and press
[ENTER].
The SONG EDIT ERASE screen will appear.
2. Use [
] [
] [
] [
parameter that you want to change, and use the VALUE
dial to make the desired settings.
Parameter
Value
Part
ALL, 1–16
From
(MEAS:
0001: 01: 000–
BEAT: TICK)
To (MEAS:
0001: 01: 000–
BEAT: TICK)
ALL, NOTE, PITCH
Data Type
BEND, CC, PC
(Only when Data Type= NOTE or CC)
If Data Type= NOTE:
Range Min
C–(Range Max value)
If Data Type= CC:
0–(Range Max value)
(Only when Data Type= NOTE or CC)
If Data Type= NOTE:
(Range Min Value)–
Range Max
G9
If Data Type= CC:
(Range Min value)–
127
] to move the cursor to the
Explanation
Selects the Song
part from which
data is to be erased.
Specifies the
beginning of the
region from which
data is to be erased.
Specifies the end of
the region from
which data is to be
erased.
Specifies the type of
data to be erased.
Specifies the lowest
note (Note) or
lowest value (CC) of
the data that is to be
erased.
Specifies the highest
note (Note) or
highest value (CC)
of the data that is to
be erased.