Inserting Blank Space (Insert) - Roland Workstation GW-8 Supplementary Manual

Creating a New Song
3. In the SONG EDIT COPY =SOURCE= screen, select
"DESTINATION" and press [ENTER].
The SONG EDIT COPY =DESTINATION= screen will
appear.
4. Use [ ] [ ] [ ] [
parameter that you want to change, and use the VALUE
dial to make the desired settings.
Parameter Value
DESTINATION settings
Part 1–16
Into (MEAS:
0001: 01: 000–
BEAT: TICK)
Copy Mode REPLACE, MIX
Copy Times 1–99
5. Select "EXECUTE" and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
34
] to move the cursor to the
Explanation
Selects the copy-
destination Song part.
If you select "ALL" in the
SOURCE setting, this
setting will be fixed at
"ALL" and cannot be
changed.
Specifies the beginning
of the region at which the
copied data is to be
pasted.
Specifies the copy
method.
Specifies the number of
times to copy the data.

Inserting Blank Space (Insert)

This function inserts blank space at the specified location.
Performance data that follows this location will be moved back
to make room for the inserted blank space. The performance
data will be lengthened by the inserted amount.
1. In the "Song Edit Menu," select "5. Insert" and press
[ENTER].
The SONG EDIT INSERT screen will appear.
2. Use [ ] [ ] [ ] [
parameter that you want to change, and use the VALUE
dial to make the desired settings.
Parameter Value
Part ALL, 1–16
From (MEAS:
0001: 01: 000–
BEAT: TICK)
For (MEAS:
0000: 00: 000–
BEAT: TICK)
1–32/2, 4, 8,
Time Signature
16
3. Select "EXECUTE" and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
] to move the cursor to the
Explanation
Selects the Song part
into which blank
space is to be
inserted.
Specifies the location
at which the blank
space is to be
inserted.
Specifies the length of
the blank space to be
inserted.
Specifies the time
signature.
* This is shown only
if the Part setting is
ALL.