JUKI AMB-289 Instruction Manual page 8

3
6
4
5
7
2
1
@– 4
<In case of sewing flat/wrapped-around button
with blindstitch or sewing flat button with
blindstitch>
Set button 1 to button loader 2 and depress
the back part of the pedal to insert the button into
button chucks 3 .
(When the button loader is not used, insert the
button by hand since the chuck is opened by
depressing the back part of the pedal.)
Set cloth 4 to tongue 5 and make it come in
contact with tongue stopper 6 . (Release of the
tongue is performed by depressing the back part
of the pedal.)
When the front part of the pedal is depressed, the
button chuck comes down to the sewing position
where the sewing is possible.
* By setting the pedal motion mode of memory
s w i t c h d a t a
automatically comes down to the sewing
position.
→ For the details of the memory switch data,
"32. (2) Memory switch data
refer to
Sewing starts when start switch 7 is turned ON.
↓
↓
, t h e b u t t o n c h u c k
list".
↓