JUKI AMB-289 Instruction Manual page 111

4) I n p u t t h e n u m b e r o f t i m e s o f t h r e a d
trimming.
Next, input the number of times of thread
trimming per process.
When number of times of thread trimming
b u t t o n
pressed, the number of times of thread
trimming input screen is displayed.
Input the value you desire with ten keys or UP/
DOWN buttons.
After the input, press ENTER button
6
* When the input value is "0", count of the
number of times of thread trimming is not
performed. Use this function by connecting
the external switch.
* F o r A M B , n u m b e r o f t i m e s o f t h r e a d
trimming is counted up by one when one
pattern has been sewn.
5) Start the count of number of pieces of
production.
When START button
9
the count of number of pieces of production is
started.
7
6) Stop the count.
Display the production control screen referring
"42. (4) Observing the production control
to
information".
When the count is being performed, STOP
switch
button
stopped.
After the stop, START button
displayed at the position of STOP button.
When continuing the count, press START
8
button again. The counted value is not cleared
until CLEAR button
@– 107
5 i n t h e p r e v i o u s p a g e i s
7 is pressed,
8 is displayed. When STOP
8 is pressed, the count is
9 is pressed.
6 .
7 is