JUKI AMB-289 Instruction Manual page 114

3) I n p u t t h e n u m b e r o f t i m e s o f t h r e a d
trimming.
Next, input the number of times of thread
trimming per process. When number of times
of thread trimming button
previous page is pressed, the number of times
of thread trimming input screen is displayed.
Input the value you desire with ten keys or UP/
DOWN buttons.
After the input, press ENTER button
3
When the input value is 0, count
of the number of times of thread
trimming is not performed. Use
this function by connecting the
external switch.
* F o r A M B , n u m b e r o f t i m e s o f t h r e a d
trimming is counted up by one when one
pattern has been sewn.
4) Start the measurement.
6
When START button
measurement of each data is started.
4
5) Stop the count.
Display the working measurement screen
referring to 1) and 2) of
the working measurement
STOP switch
measurement is being performed. When STOP
switch
is stopped.
After the stop, START button
displayed at the position of STOP button. To
continue measuring, press START button
5 4 again. The measured value is not cleared
until CLEAR button
@– 110
4 is pressed,
"42. (6) Observing
information".
5 is displayed when the
5 is pressed, the measurement
6 is pressed.
E in the
3 .
4 is