JUKI AMB-289 Instruction Manual page 45

No.
Button loader selection
<In case of shank/marble button>
: Loader OFF
<In case of normal button>
: Loader OFF
Number of times of wrapping
This item sets the number of times of thread
wrapping sewing in the neck wrapping process.
Number of stitches of thread air-blow
This item sets the number of stitches of
thread air-blow in the neck wrapping process.
Compensation of button height in the neck wrapping process
This item compensates the button holding height in the
neck wrapping process and adjusts the wrapped condition.
Button positioning motion With/without
: With
This item sets whether the compensation motion of button
positioning is performed at the time of operation by operator
before driving the sewing machine. It is convenient to use
this item when sewing buttons which are uneven in shape.
* Compensation value which has been set here is applied
to one button sewing only and the compensation value
returns to 0 after completion of sewing.
Needle height at the time of button positioning
This item sets the angle which automatically lowers
needle at the time of button positioning motion.
Set the angle which is easy to perform positioning
according to kinds of buttons, neck wrapping height, etc.
Thread drawing motor start position in
the button sewing process
This item sets the thread slack amount at the
start of sewing to stabilize thread remaining
amount at the start of sewing.
N u m b e r o f s t i t c h e s t o s t a r t t h r e a d
drawing motor operation in the button
sewing process
This item sets number of stitches to hold the
thread slack amount set in No. S39.
Compensation of tension timing on cloth
side and rear side in the button sewing
process
This item changes the tension changeover
timing at the needle entry on cloth side and
rear side, and shifts the knotting position.
Item
: Loader ON
: Loader ON
: Without
@– 41
Setting range Edit unit Initial display Remarks
– – – – – –
0 to 5 1 time
0 to 20 1 stitch
–5.0 to 5.0 0.1mm
– – – – – –
0 to 130 1˚
0 to 100 1 pulse
1 to 2 1 stitch
–90 to 90 1˚
Loader used
(Front side)
0
6
0
Without
80
30
1
0