Starting Power To The Load; Installing The Ups As A Tower; Connecting The Battery Leads - HP R3000 User Manual

IMPORTANT:
devices. The batteries charge to:
80 percent of their capacity within 3 hours
•
• 100 percent of their capacity within 48 hours

Starting power to the load

Start power to the load by placing the UPS in Operate mode (on page 38).
IMPORTANT:

Installing the UPS as a tower

Before installing the unit, review and adhere to all warnings provided in "Precautions (on page 13)."

Connecting the battery leads

WARNING:
remove the battery lead labels, and verify that the ERM circuit breakers are in the Off
position.
Charge the batteries for at least 24 hours before supplying backup power to
AC power must be available the first time the UPS is started.
To prevent personal injury from electric shock or damage to the equipment,
Installation 26