To reduce the risk of personal injury or damage to the equipment, be sure that:
WARNING:
•
The leveling feet are extended to the floor.
The full weight of the rack rests on the leveling feet.
•
The stabilizing feet are attached to the rack if it is a single-rack installation.
•
The racks are coupled together in multiple-rack installations.
•
Only one component is extended at a time. A rack may become unstable if more than one
•
component is extended for any reason.
If preparing the rails for integrated shipping, follow the same instructions as in
NOTE:
"Installing the UPS
on page 18)."
Mounting hardware for square- and round-holed racks is included in the UPS kit.
NOTE:
Loosen the wing nuts or hex nuts, and then extend the brackets to the desired length.
1.
("Installing the UPS as a
tower" on page 26,
"Installing the UPS in a
rack"
Installation 15