Rack View - HP Integrated Lights-Out User Manual

Rack View

The Rack View page presents an overview of all the enclosures and their contained blade servers,
network components, and power supplies. A component, when present, is indicated by the ability to
select the component from the Rack View. Blank or empty bays are not selectable. Component-specific
information, such as blade name, IP address, and product type is displayed as you move the mouse
cursor over each component. Clicking the component will display additional information and
configuration options in the adjacent screen.
The following fields are available on the Rack View screen:
Rack name
Logged-in iLO Location
This section annotates the blade into which the current user is logged in. The user is able to configure
blade settings for this blade only.
Selected Bay Location
This section annotates the currently selected bay. You can view information for many different types
of components, including blades, power supplies, network components, and enclosures.
Enclosure Details
Information about a particular enclosure is viewed by selecting Details located on the enumerated
enclosure headers.
A Refresh button is available to obtain current Rack View information. Click Refresh to force the entire
graphical representation of the rack to be redrawn. This will take a few moments.
If the rack view information cannot be properly obtained, an error message will display in place of the
rendered components. The Refresh button can be used to make another attempt to obtain the proper rack
Using iLO 97