HP Integrated Lights-Out User Manual page 50

Click Next to save changes and continue.
Verify Server RAID Configuration screen
This step of the installation wizard enables you to verify and accept server RAID configuration settings.
Verify the detected RAID level for the hard drives on the blade server displayed on the web page.
Click Next to keep current RAID settings.
Click Default Settings to automatically configure the RAID level based on the number of installed
drives. You are prompted to verify that you want to reset the RAID level because this could result in
loss of data. Resetting the RAID level requires a server power-on or reboot. iLO displays a page
indicating that this action is occurring. The page is refreshed automatically every 10 seconds. After
the server reboots, the next page in the installation wizard displays again. If an error occurs during
the RAID reset process, the RAID Configuration page will redisplay with an indication of the error.
An error is most likely to occur if the server is in POST. If this is the case, exit any RBSU program you
are running, allow POST to complete, and try the operation again.
The RAID level can be changed manually through RBSU.
Configuring iLO 50