Network Settings - HP Integrated Lights-Out User Manual

Secure Shell (SSH) Status
Serial Command Line Interface Status
Serial Command Line Interface Speed (bits/second)
Minimum Password Length
Remote Keyboard Model
To change iLO global settings:
Log in to iLO using an account that has the Configure iLO Settings privilege. Click Administration.
1.
Click Global Settings.
2.
Change global settings by entering your selections.
3.
After completing any parameter changes, click Apply to save the changes.
4.
For more information, see the HP Integrated Lights-Out Management Processor Scripting and Command
Line Resource Guide.

Network settings

The Network Settings option enables you to view and modify the NIC IP address, subnet mask, and other
TCP/IP-related settings. From the Network Settings screen, you can enable or disable DHCP and, for
servers not using DHCP, you can configure a static IP address.
You must have the Configure iLO Settings privilege to change these settings. Users that do not have the
Configure iLO Settings privilege can only view the assigned settings.
To change network settings for iLO:
Log in to iLO using an account that has the Configure iLO Settings privilege. Click Administration.
1.
Click Network Settings.
2.
Change the network settings as needed.
3.
Configuring iLO 26