1 Segment_Allocate_ And Segment_Allocate64_ Errors; Error Codes - HP Guardian Errors Manual

1 1 SEGMENT_ALLOCATE_ and SEGMENT_ALLOCATE64_
Errors
This section lists and describes the error codes and error lists associated with the
SEGMENT_ALLOCATE_ and SEGMENT_ALLOCATE64_ procedure. The SEGMENT_ALLOCATE_
and SEGMENT_ALLOCATE64_ error codes are the values returned in the error parameter to
SEGMENT_ALLOCATE_. The same error codes are returned by SEGMENT_ALLOCATE_CHKPT_.
Error codes and error lists associated with the ALLOCATESEGMENT procedure are described in
"ALLOCATESEGMENT Errors" (page
"USESEGMENT Errors" (page
"SEGMENT_USE_Errors" (page
NOTE: The error codes defined in the subsequent sections are applicable to both
SEGMENT_ALLOCATE_ and SEGMENT_ALLOCATE64_ APIs.

Error Codes

This subsection lists each SEGMENT_ALLOCATE_ procedure error code and provides a description
of each code.
0
Cause The operation was completed successfully.
Effect None.
Recovery Informative message only; no corrective action is needed.
1
Cause The system encountered an error while creating or opening the swap file. The error-detail
parameter contains the error number of the file-system error that occurred.
Effect The procedure sets the error code and returns without allocating the extended data segment.
Recovery Correct the call to SEGMENT_ALLOCATE_ to make sure the correct swap file is specified.
If there is no disk space available to create the swap file, either specify a different volume or create
space on the desired volume.
2
Cause The SEGMENT_ALLOCATE_ call contained an illegal combination of options. Possible causes
include:
Omitting the required segment-id parameter
Supplying a max-sizevalue that is inconsistent with segment-size
Supplying an invalid segment-type
Setting one or more "reserved, must be 0" bits to a nonzero value
The error-detail parameter contains the ordinal number of the first (leftmost) parameter encountered
whose option is in error.
Effect The procedure sets the error code and returns without allocating the extended data segment.
202 SEGMENT_ALLOCATE_ and SEGMENT_ALLOCATE64_ Errors
207). The error list for SEGMENT_USE_ is described in
209).
NO ERROR
ERROR CREATING OR OPENING SEGMENT SWAP FILE
PARAMETER ERROR
198). The error list for USESEGMENT is described in