HP Guardian Errors Manual page 252

Response The response, if any, is application dependent.
-9 JOB PROCESS CREATION
Cause (C-series-format system message only) The receiving process is the supervisor of a job and
a process running under the supervisor's GMOM job ID created a third process.
Format The layout of the received message described in terms of an array of words is:
sysmsg[0]=-9 sysmsg[1] FOR 4=Job ID sysmsg[5]=Process ID of the newly created process
Response The response, if any, is application dependent.
-10 SETTIME
Cause The system manager or operator reset the processor's internal clock.
If a call to MONITORNEW enabled receipt of SETTIME messages, the operating system sends the
process the following message.
Format The layout of the received message described in terms of an array of words is:
sysmsg[0]
sysmsg[1] FOR 4 = Job ID
sysmsg[5]
The reason codes are:
Code Meaning
0 Initial setting (Greenwich mean time (GMT) and local civil time (LCT) change).
1 Subsequent adjustment (GMT and LCT time change).
2 Daylight-savings time (LCT time change) transition.
Response The response, if any, is application dependent.
-11 POWER ON
Cause The processor power failed, then returned.
If a call to MONITORNEW enabled receipt of power on messages, the operating system sends
the process the following message.
Format The layout of the received message described in terms of an array of words is:
sysmsg[0] = -11
sysmsg[1] = Processor number
Response The response, if any, is application dependent.
-12 NEWPROCESSNOWAIT COMPLETION
Cause A call to the NEWPROCESSNOWAIT procedure finished.
Format The layout of the received message described in terms of an array of words is:
sysmsg[0]
sysmsg[1].<0:7>
sysmsg[1].<8:15> = NEWPROCESS suberror or file-system
sysmsg[2] FOR 2 = Tag passed to NEWPROCESSNOWAIT in
sysmsg[4] FOR 4 = Process ID of the new process
sysmsg[8]
252 System Messages
= -9
= Process ID of the newly created process
= -12
= NEWPROCESS error
error
filenames [36:37]
= NEWPROCESS error