HP Guardian Errors Manual page 86

Recovery Wait and retry the request. If the problem persists, bring the SMF process to the DOWN
state and then to the UP state before retrying the request again. If the problem still persists, contact
your service provider.
5064
Cause An error occurred while the NonStop Storage Management Foundation (SMF) subsystem
was attempting to perform recovery processing.
Effect The requested operation failed and recovery processing is aborted. The SMF subsystem
periodically tries again to perform recovery processing.
Recovery Appropriate recovery varies according to the specific error that occurred. Refer to the
event log for detailed information. In some cases, no user action is required.
5065
Cause A resource allocation failure occurred within the NonStop Storage Management Foundation
(SMF) subsystem during recovery processing after a 5015 error was returned.
Effect The requested operation failed and recovery processing is aborted.
Recovery Refer to the event log for additional information and take action as appropriate. Bring
the SMF process to the DOWN state and then to the UP state. Retry the request. If the problem
persists, contact your service provider.
5072
Cause When a NonStop Storage Management Foundation (SMF) process attempted to perform
recovery processing after the failure of a create, purge, rename, or update of an SMF object, an
error occurred that prevented the SMF process from initializing the PENDOPS (pending operations)
file. This error can also be returned if there is a lock failure during recovery processing or if the
PENDOPS file is unavailable.
Effect The requested operation failed and recovery processing is aborted. The SMF process enters
the DOWN state.
Recovery Refer to the event log for detailed information. In the case of a lock failure, take
appropriate action. Otherwise, wait and retry the operation by bringing the SMF process to an
UP state. If the problem persists, contact your service provider.
5073
Cause When a NonStop Storage Management Foundation (SMF) process attempted to perform
recovery processing after the failure of a create, purge, rename, or update of an SMF object, an
error occurred in the PENDOPS (pending operations) file, which prevented identification of the
process that locked an SMF object.
Effect The requested operation failed and recovery processing is aborted. The SMF process enters
the DOWN state.
86 File-System Errors
(%11710) An error occurred during recovery processing.
(device type: 3.36, 25.0, or 52.0)
(%11711) An error occurred during indeterminate outcome
processing. (device type: 3.36, 25.0, or 52.0)
(%11720) Recovery processing was unable to initialize PENDOPS
processing. (device type: 3.36, 25.0, or 52.0)
(%11721) A PENDOPS semaphore failed; the process that locked
a SMF object could not be identified.
(device type: 3.36, 25.0, or 52.0)