Handling Errors; Checking The Configuration; Using The Data Protector Gui; Using The Data Protector Cli - HP Data Protector A.06.11 Integration Manual

UNIX:
util_sapdb -homedir
SAPDB_independent_program_directory/indep_prog -config
sapdb_inst sapdb_user sapdb_pass
TIP:
To change the configuration parameters, run the same command using new values.

Handling errors

If an error occurs, the error number is displayed in the form
*RETVAL*error_number.
UNIX only: To obtain an error description, from the directory:
/opt/omni/lbin
run:
omnigetmsg 12 Error_number

Checking the configuration

Check the configuration of an SAP DB/MaxDB instance after you have created at
least one backup specification for the SAP DB/MaxDB instance. Use the Data Protector
GUI or CLI.

Using the Data Protector GUI

1. In the Context List, select Backup.
2. In the Scoping Pane, expand Backup Specifications and then SAP DB Server.
Click the backup specification to display the SAP DB/MaxDB instance to be
checked.
3. Right-click the SAP DB/MaxDB instance and click Check configuration.

Using the Data Protector CLI

UNIX only: Log in to the SAP DB/MaxDB Server system as the SAP DB/MaxDB OS
user.
Integration guide for Oracle and SAP 243