Be sure to let the discharge hose pass behind the copper tube and connect it securely
in position. See Fig. 12. Otherwise, the discharge hose may be caught in the front
insulation, leading to improper results.
Discharge
Hose
Cube Guide
9) Pour the cleaning solution into the water tank.
10) Move the service switch to the "WASH" position.
11) Replace the front insulation and the front panel in their correct positions.
NOTICE
Snap Tab
Pump Motor Bracket
Fig. 12
Snap Tab
Fig. 13
23
Float Switch
Connector
Pump Motor
Connector
Thumbscrews
Pump Motor
Float Switch