Hoshizaki KMD-410MAH Instruction Manual page 14

Left Defl ector
Thumbscrew
Collars
(Behind Left Defl ector)
11) Replace the water tank, cube guide, pump motor bracket, pump motor and fl oat switch
in their correct positions until they snap in place.
Be sure to let the discharge hose pass behind the copper tube and connect it securely
in position. See Fig. 3. Otherwise, the discharge hose may be caught in the front
insulation, leading to improper results.
12) Secure the pump motor bracket with the two thumbscrews.
13) Reconnect the pump motor connector and fl oat switch connector.
14) Replace the front insulation and front panel in their correct positions.
Right Defl ector
Fig. 7
NOTICE
13
Thumbscrew
Collars