How To Remove Panels; Icemaker; Remote Condensing Unit - Hoshizaki Serenity Series KMS-2000MLH Instruction Manual

C. How to Remove Panels

1. Icemaker

• Front Panel: Remove the screw. Lift up and towards you.
• Top Panel: Lift off.
• Right Side Panel: Remove the screw.
Slide forward slightly and lift off.
• Insulation Panel: Remove the
thumbscrews. Lift up slightly and pull
towards you.
• Top Insulation: Lift off.
• Front Frame: NOTICE! Leave the
front frame in place until "II.D.2
Water Tank Removal."

2. Remote Condensing Unit

• Top Panel: Remove the screws and lift off.
• Front Panel: Remove the screws and lift off.
• Left Side/Lower Panel (L1): Remove the screws and lift off.
• Left Side/Upper Panel Left (L2): Remove the screws and lift off.
• Left Side/Upper Panel Right (L3): Remove the screws and lift off.
• Louver Panel: Remove the screws and lift off.
• Right Side Panel: Remove the screws and lift off.
Left Side/Upper Panel Left (L2)
Left Side/Lower Panel (L1)
Left Side/Upper Panel Right (L3)
Top Panel
Legs
Remote Condensing Unit
Top Panel
Insulation
Panel
Front Panel
Right Side Panel
Front Panel
14
Top Insulation
Front Frame
Right Side Panel
Icemaker
Fig. 3
Louver Panel
Fig. 4