Confirming the SNMP Trap Settings
3.3
Procedure for Recovery to the Normal Status
This section explains two methods for using ETERNUS SF Storage Cruiser for
recovery to the normal status. Either method is suitable.
1) Recovery from the resource management window
2) Recovery from the Manual Embedding Window
3.3.1
Procedure for recovery from the resource management
window
1) Start ETERNUS SF Storage Cruiser.
2) ETERNUS SF Storage Cruiser opens the resource management window. In
3) The device properties are displayed.
4) In the property window, click the "Change" button for the device status. The
5) Select "normal" from the selection list, and then click the "OK" button.
6) The "Device Status Is Being Changed" dialog box is displayed.
7) In the property window, click "OK" to close the window. The device icon
This completes the procedure for recovery to the normal status from the resource
management window.
3-4
this window, select and right-click the icon of the device. From the pop-up
menu, select [Property].
"Change Device Status" dialog box is displayed.
turns green, and the device status changes to "normal."
P3AM-5262-01ENZ0