Setting up SNMP
1.1
This device has the functions for sending SNMP traps and collecting MIB
information via SNMP. If you set up our monitoring software "ETERNUS SF
Storage Cruiser" in this device, you can receive SNMP traps.
1.2
Make the SNMP settings from the remote management.
Operations with the remote management require the following environment:
•
•
•
1.3
This section explains the SNMP setting procedure.
1) Start the Web browser on a terminal connected to the network.
2) As shown in the figure below, enter the IP address (default: 192.168.2.1) set
1-2
SNMP Function
Notes on Setting SNMP
10BASE-T or 100BASE-TX Ethernet network
IP address that can be used for the remote management
Use Internet Explorer 7.x or Internet Explorer 8.x. (Windows XP, or later)
SNMP Setting Procedure
for this device as a URL to start the remote management.
P3AM-5262-01ENZ0