Warring Events; Table 4.2 Warning Events - Fujitsu ETERNUS LT20 S2 User Manual

4.1.2

Warring Events

SCSI invalid opcode
invalid element address
invalid field in CDB
invalid SCSI ID message
invalid LUN
invalid drive specified
SEND DIAG: invalid
test number
command sequence error
invalid boot code
invalid personality
invalid checksum
parameter length error
parameter list: invalid field
parameter list: invalid value
invalid parameter value
saving parameters
not supported
destination element full
transport element full
no cartridge in slot
source slot or drive empty
magazine not accessible
drive media removal
Prevented
library media removal
Prevented
drive not enabled
mailslot not enabled
bad status library
Controller
source not ready
destination not ready
reservation failed
wrong drive type
invalid robotic request
robotic not initialized
parity error
err log overflow
P3AM-5262-01ENZ0

Table 4.2 Warning Events (1/2)

Events Events Code
0x30 SCSI invalid opcode
0x31 invalid element address
0x32 invalid field in CDB
0x33 invalid SCSI ID message
0x34 invalid LUN
0x35 invalid drive specified
0x36 SEND DIAG: invalid test number
0x37 command sequence error
0x38 invalid boot code
0x39 invalid personality
0x3A invalid checksum
0x3B parameter length error
0x3C parameter list: invalid field
0x3D parameter list: invalid value
0x3E invalid parameter value
0x3F saving parameters not supported
0x40 destination element full
0x41 transport element full
0x42 no cartridge in slot
0x43 source slot or drive empty
0x44 magazine not accessible
0x45 drive media removal prevented
0x46 drive media removal prevented
0x47 drive not enabled
0x48 mailslot not enabled
0x49 bad status library controller
0x4A source not ready
0x4B destination not ready
0x4C reservation failed
0x4D wrong drive type
0x4E invalid robotic request
0x4F robotic not initialized
0x50 parity error
0x51 err log overflow
4.1 Event List
Description
4-3