Configuration Events; Table 4.4 Configuration Events - Fujitsu ETERNUS LT20 S2 User Manual

4.1.4

Configuration Events

Drive SCSI changed
Library SCSI changed
Drive Enable
Drive Disable
Master Drive assigned
Drive Sled added
Drive Sled removed
Library Mode changed
Element address
Net Parameter
Slots reserved
Mailslot support
Admin Password
Date/Time set
Barcode Format
Default Config set
FW Upgrade Library
FW Upgrade Drive
Autoclean Feature set
Drive FC parameters
Note:
P3AM-5262-01ENZ0

Table 4.4 Configuration Events

Events Events Code
Only available in Dual SCSI configuration
0x41 Drive SCSI ID has changed
0x42 Library SCSI ID changed (Note)
0x43 Drive was enabled
0x44 Drive disabled
0x45 Drive Master assigned
0x46 Drive Sled added
0x47 Drive Sled removed
Library Mode changed
0x48
(Sequential, Random)
0x49 Element address changed
0x4A Network parameter have changed
0x4B Slots reserved
0x4C Mailslot support
0x4D Admin Password has changed
0x4E Date and Time of RTC set
0x4F Barcode format alignment changed
0x50 Default configuration set
0x51 FW upgrade Library
0x52 FW Upgrade Drive
0x53 Autocleaning switched on or off
Drive Fibre channel parameters
0x54
changed
4.1 Event List
Description
4-7