Foxconn 6100M2MA series User Manual page 41

vTime Mode
This item is used to set timing mode.
vMemory clock Value or Limit
This option is used to set memory clock value or limit.
vDQS Timing Training Control
This option controls the DQS timing training .
vCKE base Power down mode
This option is used to set the CKE base Power dowm mode.
vCKE based Power dowm Control
This option controls the CKE based power down.
vMemory hole Remapping
This item is used to enalbe or disable the memory hole remapping.
vAuto Optimize Bottom IO
This item is used to set the auto optimize bottom IO.
vBottom of 32-bit [31:24] IO
This item is used to set Bottom of 32-bit [31:24] IO.
34
DRAM Configuration Menu
Chapter 3 BIOS Description