Foxconn 6100M2MA series User Manual page 25

Audio Connectors: CD_IN, AUX_IN(optional)
CD_IN, AUX_IN is Sony standard CD audio connectors, to receive audio input
from the CD-ROM, attach its audio connector to the CD_IN/AUX_IN audio con-
nectors on the motherboard.
1
IrDA Connector: IR
The IrDA infrared transmission allows your computer
to send and receive data via an infrared ray. The
relevant parameters for the BIOS Integrated Periph-
erals should be set prior to using this function.
1394 Connector(optional): F_1394_1(optional)
The 1394 expansion cable can be connected to ei-
ther the front (provided that the front panel of your
chassis is equipped with the appropriate interface)
or the rear panel of the chassis.
Serial ATA II Connectors: SATA_1, SATA_2,
SATA_3(optional), SATA_4(optional)
The Serial ATA II connectors are used to connect the
SATA II devices to the motherboard. These connec-
tors support the thin Serial ATA cables for primary
internal storage devices. The current SATA interface
allows up to 300MB/s data transfer rate.
Speaker Connector: SPEAKER OUT (optional)
The speaker connector is used to connect speaker
of the chassis.
18
Chapter 2 Installation Instructions
CD_R
CD_IN
GND
CD_L
AUX_R
1
AUX_IN
GND
AUX_L
1
+5V
Empty
IRRX
GND
IRTX
IR
10 9
GND Empty
+12V
+12V
TPB+
TPB-
GND GND
TPA- TPA+
2 1
F_1394 _1
1
GND
TX+
TX-
GND
RX-
RX+
GND
SATA_1/2/3/4
Empty
SPK(Pull high) NC
1
SPEAKER OUT
SPKJ