Foxconn 6100M2MA series User Manual page 26

Front Audio Connector: F_AUDIO1
(for -6 models)
The audio port includes two parts – the Front
Audio and Rear Audio. Their priority is se-
quenced from high to low (Front Audio to Rear
Audio). If headphones are plugged into the
front panel of the chassis (using the Front
Audio), then the Line Out (Rear Audio) on the
rear panel will not work. If you do not want to
use the Front Audio, pin 5 and 6, pin 9 and
10 must be short, and then the signal will be
sent to the rear audio port.
For -8 models (optional)
The audio connector provides two kinds of
audio output choices: the Front Audio, the
Rear Audio. Front Audio supports re-tasking
function. Their priority is the same.
Chassis Intruder Connector : INTR
The connector connects to the chassis se-
curity switch on the case. The system can
detect the chassis intrusion through the sta-
tus of this connector. Please set the refer-
ence items in BIOS and save the setting.
S/PDIF Out Connector: SPDIF_01
The S/PDIF out connector is capable of pro-
viding digital audio to external speaker or
compressed AC3 data to an external Dolby
digital decoder.
Note: The empty pin of SPDIF cable should
be aligned to empty pin of S/PDIF out
connector.
Chapter 2 Installation Instructions
1
MIC_IN
MIC_PWR
AUD_OUT_R
NC
AUD_OUT_L
9
F_AUDIO1
1
PORT1_L
PORT1_R
PORT2_R
SENSE_SEND
PORT2_L
F_AUDIO1
1
INTR
1
1
SPDIF_01
2
MIC_GND
+5VAC
AUD_RET_R
EMPTY
AUD_RET_L
10
AUD_GND
PRESENCEJ
SENSE1_RETURN
Empty
SENSE2_RETURN
INTRUDERJ
GND
5V
Empty
SPDIF_OUT
GND
19