8.
8
÷
Insert the Upper Lat Tower (41) into the Lower I_at
Tower (46). Fully tighten the MIO x 63mm Bolt (6)
into the Lower Lat Tower.
Slide a Weight Stop (19) onto each side of the
Weight Carriage (56).
Wrap the Cable (32) around a Pulley (45). Attach
the Pulley to the Upper Lat Tower (41) with an M10
x 70mm Bolt (2), two M10 Washers (16), two 14mm
x 15ram Spacers (14), and an M10 Nylon Locknut
(12).
Attach the other Pulley (45) to the Upper Lat Tower
(41) in the same manner.
Attach the indicated end of the Cable (32) to the
eyebolt on the Weight Carriage (56).
9
6
45
14
12
8