Tv Operation Tv Operation - Toshiba MD14F52 Owner's Manual

÷
r 1
To turn on the TV/DVD, press POWER.
The Power indicator will light.
POWER
©
-_1_,- Illustration of MD20F52
Adjust the volume level by pressing VOL + or -.
The volume level will be indicated on the
screen by green bars. As the volume level
increases, so do the number of bars. If the
volume decreases, the number of green bars
also decreases.
Set the TV/CABLE selection to the appropriate
position _.
TV - VHF/UHF channels
CABLE Cable TV channels
Press Direct channel selection buttons (0-9) to select the channel.
TV mode direct channel selection
When the TV/CABLE selection is in the TV position, all
channels can be instantly selected by using two
buttons. (for example, to
select channel 2, press "0",
then "2". If you press only "2",
channel selection will be
delayed for a few seconds.)
For channels 10 and above,
press the 2 digits in order.
CABLE mode direct channel selection
When the TV/CABLE selection is in the CABLE
position, channels can be selected as follows:
TO SELECT CABLE TV CHANNELS:
1-9: Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press
"002".
10-12: Press "0", then the remaining 2 digits.
Example, to select channel 12, press
"012".
13-99: Press the 2 digits in order. Example, to
select channel 36, press "36".
100-125: Press the 3 digits in order. Example, to
select channel 120, press "120".
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding
channel will be selected in 2 seconds.
TV CABLE
VHF VHF
2-13 2-13
UHF STD/HRC/IRC
14-69 14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-l)
100-125
(100) (125)
01
(SA)
\
Notes:
• if a channel with no broadcast is selected, the sound will auto-
matically be muted.
• if a station being viewed stops broadcasting, the TV will auto-
matically shut itself off after 15 minutes.
÷
12/23/05,14:34
÷