Cable Tv Connections - Toshiba MD14F52 Owner's Manual

TV connections
This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable YV converter box.
Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for
normal viewing requires the use of a descrambler device which is generally provided by the cable company.
Antenna
jack
75 ohm
coaxial cable
For basic cable service not requiring a converter/descrambler
box, connect the Cable TV 75 ohm coaxial cable directly to the
Antenna jack on the back of the TV/DVD.
If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the
incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect
the output jack of the converter/descrambler box to the antenna jack on the TV/DVD. Follow the connections
shown below. Set the TV/DVD to the output channel of the converter/descrambler box (usually channel 3 or 4)
and use the converter/descrambler box to select channels.
÷
Incoming
75 ohm 75 ohm cable Antenna
Cable TV to TV/DVD jack
4_ Converter/ i =_
descrambler
÷
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the
use of a converter/descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the
cable company or an electronics supply store). Follow the connections shown below. With the switch in the "B"
position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the "A" position, tune
your TV/DVD to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/
descrambler box to tune scrambled channels.
f
Incoming Converter/
descrambler Antenna
75 ohm 75 ohm cable jack
Cable TV to TV/DVD
litter A/B switc
14 _ 12/23/05,14:33