Toshiba MD14F52 Owner's Manual page 17

MPEG2 sound
You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic
realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.
Amplifier equipped with an_ I_ _1
z E udi°d c°d°rj GL
7;pe_°'IXZL t ,,,ustrat,on of M D20F52 _
audio input I T50 coaxial cable (not supplied) l
l
Use DVD video discs
encoded via the Dolby
Digital recording system.
O
O
¢#
O
÷
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input
and speaker system (right and left front speakers).
÷
Amp,,f,er equ,pped w,th _ I_l
Digital audio input ] _ I _=l
Illustration of MD20F52 !
TotypeCOAXIAL digital I'1
audio input _575 _2coaxial cable (not supplied) /
Notes:
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver.
This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO
OUT jack of the TV/DVD.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the "COAXIAL' input of a Receiver or Processor.
• Refer to the owner's manual of the connected equipment as well.
• When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate
listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the TV/DVD's power cord. If you leave the amplifier power on, the
speakers may be damaged.
17
5W20101A [E] (P13-23) 17 _ 12/23/05,14:33