Table of Contents
Advertisement
Basic setup
Setting the language
This TV/DVD can display the on screen language in English, Spanish or French
in the TV mode.
Select the language you prefer fi rst, then proceed with the other menu options.
Setting the language
1
Press MENU in the TV mode, then press
or
to display the "SETUP" menu.
2
3
Press EXIT/CANCEL to clear the menu screen.
Notes:
• If the unit does not operate properly, or No key
operation (by the unit and/or the remote control):
Static electricity, etc., may affect the TV/DVD's
operation. In such case, disconnect the AC cord once,
then connect it again.
• The TV section has its own menu and DVD section also
has its own menu
.
54
20
TV operation
TV operation
TV operation
1
To turn on the TV/DVD, press POWER.
The power indicator on the front of the main unit
will light.
2
Adjust the volume level by pressing VOL +/–.
The volume level will be indicated on the screen by
white bars. As the volume level increases, so do
the number of bars. If the volume decreases, the
number of white bars also decreases.
3
Set the TV/CABLE selection to the appropriate
position
21
.
TV
- VHF/UHF channels
CABLE - Cable TV channels
22
ENTER
/ / /
EXIT/CANCEL
MENU
POWER
0–9,100/-
VOL +/-
CH
/
4
Press direct channel selection (0–9, 100/-) or
CH
or
to select the channel.
TO SELECT ANALOG CHANNELS
When the TV/CABLE selection is in the CABLE
position, channels can be selected as follows:
TO SELECT CABLE TV CHANNELS:
1-9:
Press 0 twice, then 1-9 as needed.
Example, to select channel 2, press 002.
10-99:
Press 0, then the remaining 2 digits.
Example, to select channel 12, press 012.
100-125: Press the 3 digits in order. Example, to
select channel 120, press 120.
TO SELECT DIGITAL CHANNELS
Press the fi rst 3 digits, then press the "100/-"
button, followed by the remaining 3 digits.
Example, to select channel 015-001, press 015 -
001.
TV
CATV
VHF
VHF
2-13
2-13
UHF
STD/HRC/IRC
14-69
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
Notes:
• If a channel with no broadcast is selected, the sound will
automatically be muted.
• Digital channels may be represented by channel
numbers that include a "dash" (e.g., 85–002). These
digital channel numbers may not match the numbers in
the channel line-up provided by your cable company.
This is not a malfunction.
To memorize channels
This TV/DVD is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory, skipping
over unwanted channels. Before selecting channels, they must be
programmed into the TV/DVD's memory. To use this TV/DVD with an
antenna, set the TV/CABLE selection to the TV position. When shipped from
the factory, this selection is in the CABLE position.
TV/CABLE selection
1
Press MENU in the TV mode, then press
or
to display the "SETUP" menu.
2
Press
or
to select "TV/CABLE".
3
Press
or
to select "TV" or "CABLE".
TV - VHF/UHF
channels
CABLE - Cable
TV channels
4
Press EXIT/CANCEL to clear the menu screen.
Automatic memory tuning
Press MENU in the TV mode, then press
or
to
display the "SETUP" menu. Press
or
to select the
"CH PROGRAM", then press
or .
The TV will begin memorizing all the channels available
in your area.
TV operation
■ DISPLAY
Press DISPLAY to display the information on the TV
screen.
To cancel the display, press DISPLAY again.
(Digital channel)
(Analog channel)
■ CH RETURN
This button allows you to go back to the last channel
selected by pressing CH RTN. Press CH RTN again to
return to the last channel you were watching.
■ MUTE
Press MUTE to switch off the sound. The TV/DVD's
sound will be silenced and "MUTE" will appear briefl y
on the screen. The sound can be switched back on by
pressing this button again or VOL +/–.
/ / /
EXIT/CANCEL
MENU
To ADD/ERASE channels
1
Press MENU in the TV mode, then press
or
to
display the "SETUP" menu.
Press
or
to select "ADD/ERASE".
2
Press
or .
The "ADD/ERASE" menu will appear.
Press
or
to select "ADD/ERASE", then
press
or .
3
Press
or
to select the channel you want and
then press
or
to select "ADD" or "ERASE".
4
Repeat steps 3 for other channel you want to
add or erase.
5
Press EXIT/CANCEL to clear the menu screen.
To add a digital channel you are watching:
Select a channel you want to add. Then select "ADDING
CHANNEL" in step 2, then press
or .
21
SLEEP
DISPLAY
VOL +/-
MUTE
CH RTN
GAME
■ SLEEP
To set the TV/DVD to turn off after a preset amount of
time, press SLEEP on the remote control. The clock
will count up 10 minutes for each press of SLEEP
(OFF, 0h10m,... 1h50m, 2h00m). After the sleep
time is programmed, the display will appear briefl y
every ten minutes to remind you that the sleep timer
is operating. To confi rm the sleep timer setting, press
SLEEP and the remaining time will be displayed for a
few seconds. To cancel the sleep timer, press SLEEP
repeatedly until the display turns to OFF.
■ GAME MODE
After connecting a TV Game to the unit (see page 15),
press GAME. The TV screen changes to the Game mode.
• The Game mode screen is adjusted to the suitable
brightness for your eyes.
• If GAME is pressed during standby mode, the unit
turns on automatically and the Game mode screen
appears on the screen.
• Interactive video games that involve shooting a
"gun" type of joy-stick at an on-screen target may
not work on this TV/DVD.
■ HEADPHONES
Insert a stereo headphones (not supplied) with a 1/8" mini
plug into the HEADPHONE jack on the front panel.
If you connect headphones, the sound from TV speakers
is muted.
23
Advertisement
Table of Contents
Troubleshooting
