Advanced Playback Zooming; Locating Desired Scene - Toshiba MD14F52 Owner's Manual

÷
ii!i I ¸¸¸_" _i_ • L •
mtng/ ocattng desired scene
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
1
Press ZOOM during playback.
INPUT
zoom
©
The center part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM O,1 (x 1.3), 0,2 (x 1 ..5) and 0`3
(x 2.O).
Press A/v/</• to view a different part of the
frame.
You may move the frame from the
center position to UP, DOWN, LEFT
or RIGHT direction.
In the zoom mode, press ZOOM repeatedly to
return to a 1:1 view (0` Off).
INPUT
ZOOM
O
Notes:
,, You can select the Pause, Slow or Search playback in the zoom
mode.
,, Some discs may not respond to zoom feature.
DISPLAY
0-9
JUMP
ZOOM
A/V/,/_.
CANCEL
ENTER
:Locatin( desired scene t
Use the title, chapter and time recorded on the DVD disc to
locate the desired point to playback. In the case of VCD/CD
discs, time and track are used to locate the desired point to
playback.
To check the title, chapter and time, press DISPLAY.
Press JUMP during playback or stop mode.
J_M_
0
• "Time" works only in DVD playback
or DVD resume mode.
Press • or • to select the "[_ Time", "[_
Title/Track" or "[_ Chapter".
Press Number buttons (0-9) to input the number.
(3D GD _
(2_ (D (!)
• If you input a wrong number, press
CANCEL.
* Refer to the package supplied with
the disc to check the numbers.
Press ENTER. Playback starts.
* When you change the title,
playback starts from Chapter 1
of the selected title.
Some discs may not work in the
above operation.
÷
Note:
in case of the Video-CD playback with PBC, the JUMP does not
work.To turn off PBC, see page _.
31
5W20101A [El (P31-33) 31 _ 12/23/05,14:35