Toshiba 24V4210U User Manual page 68

146 Advanced D iscPlayback
(_lstomidng disc playback
3 Use the Channel Number buttons (0-9) to input the current
password.
If the password has not been set yet, key in "0000." This is the
factory default password.
4 Use the Channel Number buttons (0-9) to input the new
password.
You will be prompted to confirm the new password.
5 Use the Channel Number buttons (0-9) to input the new
password again.
6 Note this new password for future reference.
If you forget the system password:
1 Make sure there is no disc in the disc slot.
2 Press and hold down the VOLUME (-) button on the TV
control panel, and then press the number 4 button on the
remote control for a few seconds.
The "Initializing" message appears on-screen to indicate that
the password has been reset to its default factory setting
"0000." All DVD Setup related settings will also be reset to
their default factory values.
Spdif Output (Digital Out)
Select tile sound format of tile digital output depending on tile
enabled signal connection.
o:o SpdiffRaw: Select this option to output the signal in its native
format.
°:o Spdif/Pcm: Changes Dolby <'_ Digital output to PCM. Select
this option when using a two-channel digital stereo amplifier.
NOTE MPEG audiowill always be in PCMformatregardless oftheDigital
Outputsetting.