Toshiba 24V4210U User Manual page 129

Using theTV'sAdvanced F eatures 1 1 7
Using the advanz'ed picture settings
NOTE
o',o If thecurrentinputis ANT/CABLE o r VIDEO, t hemenuwill
displaythetext"CableClear'. Theavailable selections areOff,
Low,Middle,andHigh.
o:o If thecurrentinputis ColorStream ®HD,HDMI1 or HDMI2, the
menuwill displaythetext"DNR'.Theavailable selections are
Off,Low,Middle,and High.Low,Middle,andHighwill reduce
thenoisein varyingdegrees, f rom lowestto highest,
respectively.
4
5
To save your new settings, highlight Done, and then press the
OK button.
To revert to your original settings, highlight Reset, and then
press the OK button.
IVlPEG Noise Reduction
The MPEG Noise Reduction feature allows you to reduce visible
interference caused by MPEG compression. Choices for MPEG
Noise Reduction are Off, Low, Middle, and High. Off is
automatically selected when this feature is disabled ("grayed out").
To select the MPEG Noise Reduction level:
1
2
3
4
5
Press the MENU button to open the Picture menu.
Highlight Noise Reduction, and then press the OK button.
Press the (A/V arrow) buttons to highlight the MPEG Noise
Reduction field G Drive, and then press the (4/_ arrow)
buttons to select either Off, Low, Middle, or High.
To save your new settings, highlight Done, and then press the
OK button.
To revert to your original settings, highlight Reset, and then
press the OK button.
Using theGameModefeature
You can use tile Game Mode feature for shorter frame delays when
playing a video game requiring split-second timing between the
on-screen display and input from the controller (such as music
creation and high-action games).
This feature is more effective for 480i and 1080i input signals.