Toshiba 24V4210U User Manual page 184

2 Using theTV'sfeatures
Adjusting the audio
Usingthe digitalaudioselector
You can use the Digital Audio Selector to conveniently switch
between audio tracks on a digital channel (for those channels that
have multiple audio tracks). This temporarily overrides tile audio
track chosen by tile language option under Audio Setup, see
"Selecting stereo/SAP broadcasts" on page 82.
1 Press tile MENU button to open tile Sound menu.
2 Highlight Digital Audio Selector, and then press tile OK
button.
(Sample Image) Digital Audio Selector sc_en
3 Press the (_1 _ arrow) buttons to select the desired service.
4 Press the EXIT button.
Selecting s tereo/SAP b roadcasts
The multi-channel TV sound (MTS) feature allows you to output
high-fidelity stereo sound. MTS also can transmit a second audio
program (SAP) containing a second language, music or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the stereo mark or
word "SAP" appears when the DISPLAY button is pressed. The
MTS feature is only available for analog signals on the
ANT/CABLE input.
To listen in stereo sound:
1
2
3
4
Press the MENU button to open the Sound menu.
Highlight Audio Setup, and then press the OK button.
In the MTS field, select Stereo.
To save the new settings, highlight Done, and then press the
OK button.
To reset the settings to the factory defaults, highlight Reset,
and then press the OK button.