Toshiba 24V4210U User Manual page 124

1 1 2 Using theTV'sfeatures
Displaying 71/status infi>m_ation
5 To save the new settings, highlight Done and press the OK
button. To revert to tile factory defaults, highlight Reset and
press tile OK button.
Displaying T Vstatus information
To display TV status information:
€* Press tile INFO button on tile remote control.
Tile following information will be displayed (if applicable):
o*,o Current input (ANT/CABLE, Video, etc.)
o**oIf ANT/CABLE is tile current input, either "CABLE" (for
cable TV) or "ANT" (for over-the-air broadcasts).
€* Channel number (if in ANT/CABLE mode)
o*.. Channel label, if applicable
o*.o Digital signal strength indicator (bar graph in lower right
corner of box; for ATSC signals only)
o*.o Stereo, Mono, or SAP audio status (when in HDMI _9 input
mode, PCM)
o*.o Video resolution
**.o Aspect ratio of incoming video signal (4:3 or 16:9)
**.o V-Chip rating status
€* GameTimer (if set)
To close the screen (except ANT/CABLE input), press the INFO
button again.
The following additional information will display for ANT/CABLE
input, if applicable:
o**oTitle
.**. Duration
.**. Detailed description
To display the next program's information for digital channels,
press tile INFO button again. Pressing tile INFO button a third time
will remove the entire banner.
(Sample IIlusttvltion) Banner