Toshiba 24V4210U User Manual page 128

1 1 6 Using theTV'sAdvanced F eatures
Using the advanced picture settings
2 Highlight Picture Settings, and then press tile OK button.
Highlight Advanced Picture Settings, and then press tile OK
button.
3
4
5
Highlight Color Temperature, and then press the OK button.
In the Color Temperature field, press the (@/_ arrow)
buttons to select the mode you prefer (Cool, Medium, or
Warm).
Press the (&/Y arrow) buttons to select either B Drive or G
Drive, and then press the (_/_ arrow) buttons to adjust the
settings:
o:o B Drive: press the ( _ arrow) button to make the picture
blueish.
°:o G Drive: press the (_, arrow) button to make the picture
greenish.
NOTE
TheB DriveandG Drivesettingsareconnected t o theColor
Temperature settings andwill change basedon whichsettingis
selected in step5 above.
7 To save your new settings, highlight Done, and then press the
OK button.
8 To revert to your original settings, highlight Reset, and then
press the OK button.
NOTE If youselectoneof thefactory set picturemodes (Dynamic,
Standard, M ovie,or PC)andthenchange theColorTemperature
mode, t hepicturemodeautomatically changes to Preference.
CableClear _ digital N oiseReduction
The CableClear _'_ digital Noise Reduction feature allows you to
reduce visible interference in your TV picture. This may be useful
when receiving a broadcast with a weak signal (especially a Cable
channel) or playing a noisy video cassette or disc.
To change the CableClear settings:
1 Press the MENU button to open the Picture menu.
2 Highlight Noise Reduction, and then press the OK button.
3 In the CableClear field, select your desired setting.