Toshiba 24V4210U User Manual page 112

1 O0 Using theTV'sfeatures
Using the Media Pko_er
NOTE
o',. G ently insert the USBdevice into the
port
and do not remove
while viewing Media Player.
•".. USB device:USB Mass
Storage
Class device
(MSC)
•".. Connectivity is not guaranteedfor all devices.
•".. Connect the USBdevice to the TV
directly.
•".. Do not use a USB Hub.
•".. Youmust obtain any required permission from copyright owners
to use copyright content. Toshibacannot and doesnot grant
such permission.
•".. Depending on the file sizeand amount in your USB storage
device,it may take sometime for loading to view.A messagewill
display on-screen when loading files from the USBstorage
device.
•".. Only limited types of U3 USB device are supported. Therefore, it
is suggested not to use U3 USBfor playing Media Player.
•"..
Non-supported
c haracterswill be
replaced
with a square.
AutoStartfunction
When Auto Start is enabled, you will be asked if you want to start
the Media Player when a USB device is inserted. If Auto Start is
disabled, you must manually start the Media Player from the menu.
To change the Auto Start setting:
1 Press the MENU button to open the Setup menu.
2 Press the (y arrow) button, and then press the OK button.
3 Press the (A/Y arrow) buttons to highlight Auto Start.
4 Press the (,_/_ arrow) buttons to select On/Off.
Toopen theMediaPlayer
Auto Start:
1 Gently insert a supported USB storage device to the USB port
on the rear side of the TV. A prompt will appear.
NOTE
If yourepeatedly i nsertandremove theUSBconnector, the prompt
maynotappear.