Framing And Clearances A. Selecting Appliance Location - Heat & Glo LifeStyle Twilight-II Owner's Manual

3
Framing and Clearances
NOTE:
• Illustrations reflect typical installations and are
FOR DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual
design preference.
A. Selecting Appliance Location
When selecting a location for your appliance it is important
to consider the required clearances to walls (see Figure 3.1).
Figure 3.1 Appliance Locations
6
GLASS
B
In addition to these framing dimensions, also reference the following section:
• Clearances and Mantel Projections (Section 3.B and 3.C)
D
GLASS
C
GLASS
Model
Minimum
43
Inches
Twilight-II
1092.2
Millimeters
Heat & Glo LifeStyle Collection • Twilight-II • 2087-900 Rev. G • 12/05
NOTE: For actual appliance dimensions refer to Sec-
tion 13.
FLUSH TO EXTERIOR INSULATED ENVELOPE
GLASS
B
A
E
FLUSH TO EXTERIOR INSULATED ENVELOPE
A B C
-
Minimum Minimum
1/2 24
12.7 609.6 914.4
WARNING
Fire Risk
Provide adequate clearance:
• Around air openings
• To combustibles
• For service access
Locate appliance away from traffic areas.
B
D E
-
36 43
1092.2