Table of Contents
Advertisement
(SUPPLIED WITH
TL-TRIM KIT)
REQUIRED
HOOD
(SUPPLIED WITH
TL-TRIM KIT)
HOUSE
WRAP
NON-COMBUSTIBLE
SHEATHING
Figure 8.3 Exterior View
Outside Facing Material
WARNING
Fire Risk.
Water Intrusion Risk.
TL-TRIM Kit with hood is required.
•
TL-TRIM Kit must be installed on
exterior before flashing and facing.
• May install non-combustible materials to cover gap be-
tween facing material and appliance (see Figure 8.3).
COMBUSTIBLE
SHEATHING
REQUIRED
FLASHING
12 IN.
Heat & Glo LifeStyle Collection • Twilight-II • 2087-900 Rev. G • 12/05
12 IN.
6 IN.
MAX.
6 INCH MAXIMUM
PROJECTION FROM
FACE OF APPLIANCE
Fire Risk.
Finish all edges and fronts to clearances and
specifications listed in manual.
•
Black metal columns may be covered with non-
combustible material only.
•
Do NOT overlap combustible materials onto
appliance front.
•
Install combustible materials up to specified clear-
ances on top front and side edges.
•
Seal joints between the finished wall and appliance
top and sides using only a 300
HOUSEWRAP
NON-COMBUSTIBLE
SHEATHING
BRICK
LEDGE
NON-
COMBUSTIBLE
FACING
THERE MUST BE NO GAP
BETWEEN BRICK LEDGE,
FACING MATERIAL AND
APPLIANCE FRONT.
WARNING
o
F minimum sealant.
19
Advertisement
Table of Contents
